[DO-1534] Add deploy Huawei CSI Plugin (!23)

[DO-1534] Co-authored-by: denis.patrakeev <denis.patrakeev@avroid.tech> Reviewed-on: https://git.avroid.tech/K8s/k8s-configs/pulls/23
2025-02-20 13:40:33 +03:00
parent 13c59eca90
commit b51a0d0225
7 changed files with 1514 additions and 0 deletions
--- a/clusters/k8s-avroid-office.prod.local/namespaces/huawei-csi/values-ovveride.yaml
+++ b/clusters/k8s-avroid-office.prod.local/namespaces/huawei-csi/values-ovveride.yaml
@@ -0,0 +1,82 @@
+images:
+  # Images provided by Huawei
+  huaweiCSIService: harbor.avroid.tech/huawei_esdk_k8s_plugin/huawei-csi:4.6.0
+  storageBackendSidecar: harbor.avroid.tech/huawei_esdk_k8s_plugin/storage-backend-sidecar:4.6.0
+  storageBackendController: harbor.avroid.tech/huawei_esdk_k8s_plugin/storage-backend-controller:4.6.0
+  huaweiCSIExtender: harbor.avroid.tech/huawei_esdk_k8s_plugin/huawei-csi-extender:4.6.0
+
+  # CSI-related sidecar images provided by the Kubernetes community.
+  # These must match the appropriate Kubernetes version.
+  sidecar:
+    attacher: harbor.avroid.tech/registry-k8s-io-proxy/sig-storage/csi-attacher:v4.4.0
+    provisioner: harbor.avroid.tech/registry-k8s-io-proxy/sig-storage/csi-provisioner:v3.6.0
+    resizer: harbor.avroid.tech/registry-k8s-io-proxy/sig-storage/csi-resizer:v1.9.0
+    registrar: harbor.avroid.tech/registry-k8s-io-proxy/sig-storage/csi-node-driver-registrar:v2.9.0
+    livenessProbe: harbor.avroid.tech/registry-k8s-io-proxy/sig-storage/livenessprobe:v2.12.0
+    snapshotter: harbor.avroid.tech/registry-k8s-io-proxy/sig-storage/csi-snapshotter:v6.3.0
+    snapshotController: harbor.avroid.tech/registry-k8s-io-proxy/sig-storage/snapshot-controller:v6.3.0
+
+# Namespace for installing huawei-csi-nodes and huawei-csi-controllers
+kubernetes:
+  # the default value huawei-csi is recommended.
+  namespace: huawei-csi
+
+controller:
+  # controllerCount: Define the number of huawei-csi controller
+  # Allowed values: n, where n > 0
+  # Default value: 1
+  # Recommended value: 2
+  controllerCount: 2
+  
+  # volumeNamePrefix: Define a prefix that is prepended to volumes.
+  # THIS MUST BE ALL LOWER CASE.
+  # Default value: pvc
+  # Examples: "volumes", "vol"
+  volumeNamePrefix: pvc-san
+
+  # nodeSelector: Define node selection constraints for controller pods.
+  # For the pod to be eligible to run on a node, the node must have each
+  # of the indicated key-value pairs as labels.
+  # Leave as blank to consider all nodes
+  # Allowed values: map of key-value pairs
+  # Default value: None
+  nodeSelector:
+    node-role.kubernetes.io/worker: ""
+
+node:
+  # nodeSelector: Define node selection constraints for node pods.
+  # For the pod to be eligible to run on a node, the node must have each
+  # of the indicated key-value pairs as labels.
+  # Leave as blank to consider all nodes
+  # Allowed values: map of key-value pairs
+  # Default value: None
+  nodeSelector:
+    node-role.kubernetes.io/worker: ""
+
+  # tolerations: Define tolerations that would be applied to node daemonset
+  # Add/Remove tolerations as per requirement
+  # Leave as blank if you wish to not apply any tolerations
+  # Allowed values: map of key-value pairs
+  # Default value: None
+  tolerations:
+    - key: "node.kubernetes.io/memory-pressure"
+      operator: "Exists"
+      effect: "NoExecute"
+    - key: "node.kubernetes.io/disk-pressure"
+      operator: "Exists"
+      effect: "NoExecute"
+    - key: "node.kubernetes.io/network-unavailable"
+      operator: "Exists"
+      effect: "NoExecute"
+    - key: "node-role.kubernetes.io/control-plane"
+      operator: "Exists"
+      effect: "NoSchedule"
+
+# The CSI driver parameter configuration
+csiDriver:
+  # Maximum number of concurrent disk scans or detaches, support 1~10
+  connectorThreads: 4
+  # Flag to enable or disable volume multipath access, support [true, false]
+  volumeUseMultipath: true
+  # Multipath software used by fc/iscsi. support [DM-multipath, HW-UltraPath, HW-UltraPath-NVMe]
+  scsiMultipathType: DM-multipath